3 Phase Remote Monitoring

 

Data and Power Solutions provide the following 3 Phase monitoring options:

 

Current (A) Monitoring:

 

Option 1: Local 3-Phase Current(A) monitoring:

 

Local Digital Display shows the incoming Current(A) Monitoring for Phase L1 / L2 and L3.

 

Option 2: Remote 3-Phase Current(A) monitoring:

 

A single RJ45 connection in the unit allows you to monitor the incoming Current(A) on Phases L1 / L2 / L3 as well as the Current(A) on the Neutral return to make the task of balancing the load on your Phases' easier.

Connect to the unit via HTTP / SNMP and XML. Configure High / Low SNMP trap alarms

 

Option 3: Remote 3-Phase & Per socket Current(A) monitoring:

 

Along with all the features in Option 2, you can also monitor the Current for each socket on the PDU. All via HTTP/ SNMP and XML with High / Low alarms.

 

Power & KWH monitoring:

 

Option 1: Remote 3-Phase Power Monitoring

 

A single RJ45 connection on the unit gives you access to Power (Volts/Amps/Real Power/Apparent Power/Power Factor) and KWh monitoring for all 3 Incoming Phases.

An advanced Graphical User Interface allows for indepth configuration of remote alarms,  User Access, Data Logging etc.

 

Option 2: Remote 3-Phase Power Monitoring & Control

 

A single RJ45 connection on the unit gives you access to Power (Volts/Amps/Real Power/Apparent Power/Power Factor) and KWh monitoring for all 3 Incoming Phases.

User programmable sequential startup and full socket control. On/Off/Reboot/Start Up/Shut Down.

An advanced Graphical User Interface allows for indepth configuration of remote alarms,  User Access, Data Logging etc.

 

 

Protocols supported are: DHCP, HTTP, HTTPS (SSL/TLS), ICMP, TCP/IP, SMTP/POP3, HTML, SNMP, CSV, TELNET, WAP, PDA, XML.